Services
  • Posted: 2024-04-23 11:28:38  Hits: 1248
    In order to meet the requirements of rotomolding technique, the raw material should have the following performance.(1) Thermal stability.The raw material should have thermal stability so that can prevent the reducing performance when material ground into powder. Mostrotomolding products&! 
  • Posted: 2024-04-23 11:27:51  Hits: 1261
    Therotomolding portable toilethas portability and applicability.It not only can be built with fixed structure, but also can be movable for its convenient inner facilities and has no other special requirements, except for electricity. In terms of function, the portable toilet is sam! 
  • Posted: 2024-04-23 11:26:56  Hits: 1252
    Pigments will affect therotomolding productsin various aspects, including: shrink ratio, nontransparency, durability, light stability, impact strength and other physical properties that have impact on electrostatic swirl and the processing time.There are mainly two kinds of pigment! 
  • Posted: 2024-04-23 11:26:01  Hits: 1280
    This article introduces several limitations ofrotomoldingtechnique in detail.1. Large energy consumption.The mould must be repeatedly subjected to alternatively changing temperature during the rotomoling cycles, so in general, the rotomolding process need more energy than other rel! 
  • Posted: 2024-04-23 11:24:38  Hits: 1370
    This article introduces advantages ofrotomoldingfuel tanks in detail.1. Light-weighted. When the engine power is the same, the lighter weight of car, the grater carrying capacity the car has. Therefore, designers tried best to lighten the car’s weight in order to save fuel. The relative! 
  • Posted: 2024-04-23 11:23:53  Hits: 1278
    This article introduces features of rotomolding technique in detail.1. The mold is simple and cost is low, which is suitable for manufacturing products with big size. The rotomolding mold needs to withstand high pressure and unnecessary for high intensity, so the structure is simple and easy to prod! 
  • Posted: 2024-04-23 11:23:05  Hits: 1274
    The quality of rotomolding mold determines the quality ofrotomoldingproducts, so it is important to maintain the mold.However, many workers don’t pay much attention to the maintenance of the mold in the process; they lack of relevant knowledge and thus cause the damage to the mold! 
  • Posted: 2024-04-23 11:21:57  Hits: 1260
    With the development of rotational molding technology, nowadays,rotomoldingproducts have been widely used in daily life.Let’s look the following examples:1. ContainersThis kind of products is widely used in different fields, such as water containers, liquid chemical (e.g. acids, a! 
  • Posted: 2024-04-23 11:21:13  Hits: 1252
    Rotomolding products are simple and practical, which is a big advantage, but it also brings some deficiency to the technology. For example, the inner part of products is prone to produce bubbles, and the surface is easy to become empty; products are easy to bend, shrinkage and change color, etc. The! 
  • Posted: 2024-04-23 11:20:22  Hits: 1265
    For each kind of plastic and plastic parts, there is a temperature limitation on mold surface, once exceed the limitation, one or more adverse effects may appear.The higher temperature ofmoldis, the smaller flow resistance will be. In a number of injection molding machine, this nat! 
Contact & Follow
Guankou Town, Jimei District, Xiamen, China
+86-13599903836