• Posted: 2024-04-23 11:17:38  Hits: 1260
    Applicable for various, small batch production of plastic products:due to the fact thatrotational moldingis not affected by external force, the mold is simple, low cost and easy to fabricate, for this reason it is easy to exchange products. Besides, roll-plastic equipment also has! 
  • Posted: 2024-04-23 11:16:50  Hits: 1258
    Injectionmoldinghangers mean plastic hangers, mainly made through injection molding process. Since environment of most plastic hangers production workshop is terrible, if the machine has low anti-interference ability, phenomenon like electronic feet beat, chaotic of machine’s program, m! 
  • Posted: 2024-04-23 11:15:57  Hits: 1256
    Design steps for mould sample are as following:a. According to themoulddrawing, analysis and understand the design intent, structure features and technical requirements of the mould and take these into consideration when designing model.b. Determine the locating basis of measurement posi! 
  • Posted: 2024-04-23 11:14:44  Hits: 1248
    1. Metal trapTransport crush waste by pipeline, using metal trap to separate metal chips of 0.75-1.2 mm diameter in the process of transmission.2. Electrostatic separatorCrush the adulterant and put it into electrostatic separator, taking advantage of different electric properties of metal and! 
  • Posted: 2024-04-23 11:13:57  Hits: 1299
    Rotomolding is a kind of hollow plastic molding process, also called as rotational molding or rotary forming.Process ofrotomoldingis to put the mold plastic powder into mould, then heat the mould and make it rotate continuously along the two perpendicular axes. Under the effect of! 
  • Posted: 2024-04-23 11:12:52  Hits: 1270
    With the development of rotational molding, application range of rotational molding products is increasingly expanding, now rotational molding products are widely used, and here are some representative application examples as follows.Rotomolding containersThis kind of plastic products is widely used! 
  • Posted: 2024-04-23 11:11:31  Hits: 1262
    Rotomolding, called as rotational moulding or rotary forming, is a kind of plastics molding process technology with long history. It’s reported that the pioneer technological core of rotomolding probably derives from Qing Dynasty. But plastic rotomolding originated from England, with the first roto! 
  • Posted: 2024-04-23 11:11:04  Hits: 1264
    What Application Scopes of Rotomolding Products?With the development of rotational molding forming process, the application scope of roto molded products expands unceasingly.Up to now, the application range of rotomolding products is wide. There are some typical examples below.1. R! 
  • Posted: 2024-04-23 11:00:39  Hits: 1265
    Why Rotational Molding?Many people may have this problem in their minds.This technical article tells us in details about it including rotomolding technology definition, three main advantages of rototational molding and six steps of rotomolding process, etc.A. What is Rotational Molding?&! 
Contact & Follow
Guankou Town, Jimei District, Xiamen, China
+86-13599903836